what is the ratio of the one shot hardener to paint
- Description
Designed for traditional sign painting, these oil based lettering enamels provide superior vibrancy, flexibility, durability, and unmarried stroke coverage. Specified for fine, sign paint lettering on shop fronts and vehicles, the vibrant colors of 1 Shot Lettering Enamels spread evenly and offer outstanding hiding, durability and fade resistance. Superior menses characteristics clinch the virtual absence of brush marks and provide a clean, sharp edge. Ideal for use on interior or exterior metallic, glass, woods, and enamel receptive banners and vinyl.
- Single stroke coverage
- Outstanding hiding, durability, and fade resistance
- Superior flow characteristics assure the virtual absence of brush marks and provide a clean, sharp edge
- First-class weathering properties
- Vibrant colors can be intermixed
- Can be brushed, rolled, or sprayed
- Intended for sign writing on storefronts, vehicles, or wherever fine lettering is desired.
Surface Training:
- Utilise over clean, dry surfaces which are free from wax, grease, dust, chalk, etc., and have been primed with the appropriate ane Shot/Chromatic Primer.
- Prime well-nigh rigid plastics, (including polystyrene, PVCs and PVFs) with Chromatic 5004 Articulate Vinyl Primer. Prime about flexible plastics, synthetics, (including vinyl, many awning materials and non-ERC prepared banner materials) as well as leather and faux leathers with Chromatic Ti-Cote Primer Bulwark (4331010 Gloss/4331011 Flat)
Mix Ratios:
- Utilize only 6000 series reducers (ZZ6000, ZZ6001, ZZ6002).
- For brush applications, use no more than than 10% reducer or menstruation enhancer as needed to maintain desired menstruation characteristics and castor control.
- For spray and airbrush applications, apply no more 25% ZZ6001 Low Temperature Reducer.
- Do non reduce Lettering Enamels for roller applications.
Application:
- Brush
- Roller
- Airbrush
- Other spray systems
Drying Times:
- Dry to bear upon: two to 5 hours.
- Dry to handle: 8 to 12 hours.
- Dry to recoat: 12 to 16 hours.
- Drying time is all-time when temperature is in a higher place 65°. Between l° and 65°, drying time is much slower. Paint volition non completely dry out below 50°.
Equipment Cleaning:
- Clean equipment with mineral spirits.
- Clean brushes with 4004 Brush Cleaner.
Technical Data:
- VOC Less H2o Less Exempts - Fix to Apply (package/as is).................... 2.87-4.36 lbs./gal (344-523 g/L)
- VOC Less Water Less Exempts - w/ 10% hardener........................................ 2.95-4.31 lbs./gal (353-517 g/Fifty)
- VOC Less H2o Less Exempts - w/ 10% reduction or flow enhancer....... 3.21-4.57 lbs./gal (385-548 grand/L)
- VOC Less Water Less Exempts - westward/ 25% reduction ...................................... 3.62-iv.81 lbs./gal (385-548 m/50)
- Solids past Weight - Ready to Utilise (bundle/every bit is) .............................................. 50.3-74.9 %
- Solids by Volume - Ready to Employ (packet/as is)............................................. 38.6-56.9 %
- Theoretical Coverage - Set to Utilize (parcel/as is)...................................... 619-913 sq. ft./gal at 1 mil, 100% transfer efficiency
- Reviews
Reviews
Thou.H.
Fantastic Product
I ordered half a dozen sizes & colors of One Shot equally recommended by the artist/ former sign shop owner helping me. We just finished sign #1 & it looks PHENOMENAL. Thanks for your aid w/ my order. Very pleased with the products AND your service.
Exit a Review
- Details
Details
Current Stock:
Weight: 1.00 LBS
Width: seven.00
Height: 7.00
Depth: seven.00
Source: https://store.southernpaintandsupply.com/one-shot-lettering-enamels/
0 Response to "what is the ratio of the one shot hardener to paint"
Post a Comment